HP 3PAR OS 3.1.3 Command Line Interface Reference

removesnmpmgr
DESCRIPTION
The removesnmpmgr command removes preregistered SNMP managers from receiving alerts
(traps).
SYNTAX
removesnmpmgr [option <arg>] <manager_IP>
AUTHORITY
• Super
• Any role granted the snmpmgr_remove right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
–p <port_number>
Specifies the port number where the manager receives traps. If not specified, the port number
defaults to 162.
SPECIFIERS
<manager_IP>
Specifies the IPv4 or IPv6 address of the host where the manager runs. IPv6 address is in
hexadecimal, case insensitive, and is separated by colons. An example would be:
5def:2008:0:0:abcd:0:0:161a
In addition, a double colon (::) can be used once in an address to replace multiple fields of zeros.
For example:
5def:2008:0:0:abcd::161a
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example displays the removal of a manager with the IPv4 address 123.45.67.89
from the list of registered managers:
cli% removesnmpmgr 123.45.67.89
The following example displays the removal of a manager with the IPv6 address
5def:2008:abcd::161a from the list of registered managers:
cli% removesnmpmgr 5def:2008:abcd::161a
removesnmpmgr 229