HP 3PAR OS 3.1.3 Command Line Interface Reference

Node Date Information
For Details SeeAuthorityDescriptionCommand
“setdate” (page 279)Super, Service
1
Any role granted the
date_set right.
Sets the system time and
date on all nodes.
setdate
“showdate” (page 363)Any role in the system.Displays the date and time
on all system nodes.
showdate
1
You need access to all domains in order to run this command.
Controller Node Properties
For Details SeeAuthorityDescriptionCommand
“setnode” (page 294)Super, Service
1
Any role granted the
node_set right.
Sets the properties of the
node components such as
the serial number of the
power supply.
setnode
“shownode” (page 400)Any role in the system.Displays an overview of the
node specific properties.
shownode
“shownodeenv” (page 408)Any role in the system.Displays the node’s
environmental status.
shownodeenv
1
You need access to all domains in order to run this command.
Controller Node EEPROM Log
For Details SeeAuthorityDescriptionCommand
“showeeprom” (page 368)Any role in the system.Displays node EEPROM
information.
showeeprom
Array and Controller Node Information
For Details SeeAuthorityDescriptionCommand
“locatenode” (page 191)Super, Service
1
Locates a particular node
component by blinking LEDs
on the node.
locatenode
Any role granted the
node_locate right.
“locatesys” (page 192)Super, Service
1
Locates a system by blinking
its LEDs.
locatesys
Any role granted the
sys_locate right.
“setsys” (page 322)Super, Service
1
Enables you to set
system-wide parameters such
as the raw space alert.
setsys
Any role granted the
sys_set right.
“showsys” (page 474)Any role in the system.Displays the HP 3PAR
Storage System properties,
showsys
including system name,
model, serial number, and
system capacity.
24 Commands Quick Reference