HP 3PAR OS 3.1.3 Command Line Interface Reference
setaocfg
DESCRIPTION
The setaocfg command updates an Adaptive Optimization (AO) configuration.
AUTHORITY
Super, Edit
SYNTAX
setaocfg [options <arg>] <aocfg_name>
OPTIONS
-t0cpg <cpgname>
Specifies the Tier 0 CPG for this AO config.
-t1cpg <cpgname>
Specifies the Tier 1 CPG for this AO config.
-t2cpg <cpgname>
Specifies the Tier 2 CPG for this AO config.
-mode <mode>
Specifies the optimization bias for the AO configuration, which can be one of the following:
• Performance — Move more regions toward higher performance.
• Balanced — Balanced between higher performance and lower cost.
• Cost — Move more regions toward lower cost tier.
-name <newname>
Specifies a new name for the AO configuration of up to 31 characters in length.
SPECIFIERS
None
NOTES
• Two or more Tier CPGs must be defined.
• If domains are used, all CPGs must be in the same domain or not in any domain.
• A CPG can only belong to one AO configuration.
• A CPG can be removed from a tier by specifying a null string "". At least two tiers must
remain.
• A CPG can be moved and swapped between tiers within the same AO configuration.
• A CPG cannot be moved between AO configurations; it must first be removed from one and
then added to the second.
• Active use of Adaptive Optimization requires an Adaptive Optimization license. Contact your
HP representative for more information.
260 Set Commands