HP 3PAR OS 3.1.3 Command Line Interface Reference
For Details SeeAuthorityDescriptionCommand
“srstatport” (page 566)Any role in the system.Displays historical
performance data reports for
ports.
srstatport
“srstatqos” (page 569)Any role in the system.Displays historical
performance data reports for
QoS rules.
srstatqos
“srstatvlun” (page 578)Any role in the system.Displays historical
performance data reports for
VLUNs.
srstatvlun
“srvvspace” (page 581)Any role in the system.Displays historical space
data reports for virtual
volumes (VVs).
srvvspace
CIM Server Commands
For Details SeeAuthorityDescriptionCommand
“setcim” (page 270)Super, Service
1
Sets the properties of the
CIM server, including
setcim
Any role granted the
cim_set right.
options to enable or disable
the SLP, HTTP and HTTPS
ports for the CIM server.
“showcim” (page 355)Any role in the system.Displays the CIM server
setting information and
status.
showcim
“startcim” (page 586)Super, Service
1
Any role granted the
cim_start right.
Starts the CIM server to
service CIM requests.
startcim
“stopcim” (page 640)Super, Service
1
Any role granted the
cim_stop right.
Stops the CIM server from
servicing CIM requests.
stopcim
1
You need access to all domains in order to run this command.
Sparing Commands
For Details SeeAuthorityDescriptionCommand
“createspare” (page 124)Super, Service
1
Creates spare chunklets.createspare
Any role granted the
spare_create right.
“movech” (page 193)Super, Service, Edit
1
Moves specified chunklets.movech
Any role granted the
ch_move right.
“movechtospare” (page 196)Super, Service, Edit
1
Moves specified chunklets to
spare.
movechtospare
Any role granted the
ch_movetospare right.
“movepd” (page 198)Super, Service, EditMoves data from specified
Physical Disks (PDs) to a
movepd
Any role granted the
pd_move right.
temporary location selected
by the system.
CIM Server Commands 35