HP 3PAR OS 3.1.3 Command Line Interface Reference

EXAMPLES
The following examples display information for a single system’s drive cages:
cli% showcage
Id Name LoopA Pos.A LoopB Pos.B Drives Temp RevA RevB Model Side
0 cage0 0:1:1 0 1:1:1 0 40 24-33 2.05 2.05 DC4 n/a
1 cage1 0:1:2 0 1:1:2 0 24 26-32 2.05 2.05 DC2 0
1 cage1 0:1:3 0 1:1:3 0 16 28-32 2.05 2.05 DC2 1
2 cage2 0:1:4 0 1:1:4 0 16 33-36 04 04 DC3 n/a
The columns in the previous example are identified as follows:
• Id. The cage number.
• Name. The name of the cage.
• LoopA. The position of the controller node port to which the cage’s A port (the top port) is
connected.
• Pos.A. Indicates how closely connected the cage’s A port is to the controller node port. The
value is 0 if the A port is non daisy chained to the node or 1 if daisy chained.
• LoopB. The position of the controller node port that is connected to the cage’s B port.
• Pos.B. Indicates how closely connected the cage’s B port is to the controller node port. The
value is 0 if the B port is non daisy chained to the node or 1 if daisy chained.
• Drives. The number of physical disks in the drive cage.
• Temp. The range of current temperatures for the drives in the drive cage, in Celsius.
• RevA. The cage firmware version for side A of the drive cage.
• RevB. The cage firmware version for side B of the drive cage.
• Model. The model can be DC1, DC2, DC3, or DC4.
• Side. Specifies the right (1) or left (0) side of the drive cage.
Specifying the –d option provides more detailed information about the drive cages. See the
following E200 Storage Server example for cage0:
cli% showcage -d
Id Name LoopA Pos.A LoopB Pos.B Drives Temp RevA RevB Model Side
0 cage0 0:0:1 0 1:0:1 0 8 29-32 03 03 DC3 n/a
-----------Cage detail info for cage0 ---------
Position: ---
-----------Midplane Info------------
VendorId,ProductId 3PARdata,DC3
Serial_Num OPS45811C010719
Node_WWN 20000050CC010719
TempSensor_State OK
TempSensor_Value 35
OpsPanel_State OK
Audible_Alarm_State Muted
ID_Switch 4
Cage_State OK
showcage 351