HP 3PAR OS 3.1.3 Command Line Interface Reference

Interface Board Info LoopA LoopB
Firmware_status Current Current
Product_Rev 03 03
IFC_State OK OK
ESH_State OK OK
Master_CPU Yes No
Loop_Map valid valid
Link_Speed 2Gbps 2Gbps
Port0_State OK OK
Port1_State No_SFP No_SFP
Port2_State No_SFP No_SFP
Port3_State No_SFP No_SFP
Power Supply Info State Fan State AC Model
ps0 OK MedSpeed OK --
ps1 OK MedSpeed OK --
-------------Drive Info------------- ----LoopA----- ----LoopB-----
Drive NodeWWN State Temp(C) ALPA LoopState ALPA LoopState
0:0 20000011c60b0379 OK 32 0x88 OK 0x88 OK
3:0 20000011c60b18b4 OK 29 0x81 OK 0x81 OK
4:0 2000000c50c3560d OK 31 0x80 OK 0x80 OK
7:0 2000000c501fd935 OK 30 0x79 OK 0x79 OK
8:0 2000000c501fd804 OK 32 0x76 OK 0x76 OK
11:0 20000011c60b0aeb OK 29 0x73 OK 0x73 OK
12:0 2000000c501fd7ad OK 32 0x72 OK 0x72 OK
15:0 2000000c501fcbe9 OK 31 0x6d OK 0x6d OK
Specifying the –d option provides more detailed information about the drive cages. See the
following DC4 example from a T-Class Storage Server example for cage0:
cli% showcage -d cage0
Id Name LoopA Pos.A LoopB Pos.B Drives Temp RevA RevB Model Side
0 cage0 0:1:1 0 1:1:1 0 40 24-33 2.05 2.05 DC4 n/a
-----------Cage detail info for cage0 ---------
Position: ---
Fibre Channel Info PortA0 PortB0 PortA1 PortB1
Link_Speed 4Gbps 0Gbps 0Gbps 4Gbps
----------------------------------SFP Info-----------------------------------
FCAL SFP -State- --Manufacturer-- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
0 0 OK FINISAR CORP. 4.20 No No No Yes
0 1 OK FINISAR CORP. 4.20 No No Yes Yes
1 0 OK FINISAR CORP. 4.20 No No Yes Yes
1 1 OK FINISAR CORP. 4.20 No No No Yes
Interface Board Info FCAL0 FCAL1
Link A RXLEDs Green Off
Link A TXLEDs Green Green
Link B RXLEDs Off Green
Link B TXLEDs Green Green
LED(Loop_Split) Off Off
LEDS(system,hotplug) Green,Off Green,Off
-----------Midplane Info-----------
Firmware_status Current
Product_Rev 2.05
352 Show Commands