HP 3PAR OS 3.1.3 Command Line Interface Reference

showeeprom
DESCRIPTION
The showeeprom command displays node EEPROM log information.
SYNTAX
showeeprom [options] [<node_ID>...]
AUTHORITY
Any role in the system.
OPTIONS
–dead
Specifies that an EEPROM log for a node that has not started or successfully joined the cluster be
displayed. If this option is used, it must be followed by a list of nodes.
SPECIFIERS
<node_ID>...
Specifies the node ID for which EEPROM log information is retrieved. Multiple node IDs are
separated with a single space (0 1 2). If no specifiers are used, the EEPROM log for all nodes is
displayed.
RESTRICTIONS
None
EXAMPLES
The following example displays the EEPROM log for all nodes:
cli% showeeprom
Node: 0
--------
Board revision: 0920-1053-03.01
Assembly: FLH 2007/50 Serial 0039
System serial: 1000183
BIOS version: 2.1.3
OS version: 2.2.4.32
Reset reason: Unknown
Last boot: 2008-02-28 14:58:25 PST
Last cluster join: 2008-02-28 14:58:37 PST
Last panic: Never
Last panic request: Never
Error ignore code: 00
SMI context: 00
Last HBA mode: 2a000000
BIOS state: ff 23 26 27 28 29 2b 80
TPD state: 34 40 ff 2a 2c 2e 30 32
Code 128 (BIOS update) - Subcode 0x2020103 (2020102) Thu Feb 28 14:54:13 2008
Code 25 (PROM Failure) - Subcode 0x1 (0) Fri Feb 15 07:58:48 2008
[Repeat] Fri Feb 15 07:59:20 2008
Code 128 (BIOS update) - Subcode 0x2020102 (2020009) Fri Feb 15 07:58:39 2008
Code 25 (PROM Failure) - Subcode 0x1 (0) Fri Feb 15 07:56:33 2008
Code 20 (AP Init Failure) - Subcode 0x0 (0) Thu Feb 14 23:30:05 2008
[Repeat] Fri Feb 15 08:36:13 2008
Code 25 (PROM Failure) - Subcode 0x1 (0) Tue Jan 29 13:31:35 2008
[Repeat] Tue Jan 29 13:32:07 2008
368 Show Commands