HP 3PAR OS 3.1.3 Command Line Interface Reference
Code 20 (AP Init Failure) - Subcode 0x0 (0) Tue Jan 29 13:30:56 2008
Code 25 (PROM Failure) - Subcode 0x1 (0) Tue Jan 29 13:17:57 2008
Code 20 (AP Init Failure) - Subcode 0x0 (0) Tue Jan 29 13:17:28 2008
Code 25 (PROM Failure) - Subcode 0x1 (0) Tue Jan 29 13:14:49 2008
Code 20 (AP Init Failure) - Subcode 0x0 (0) Tue Jan 29 13:04:57 2008
Code 10 (PCI Failure) - Subcode 0xd (30) Mon Jan 14 18:17:12 2008
Node: 1
--------
Board revision: 0920-1053-03.01
Assembly: FLH 2007/50 Serial 0042
System serial: 1000183
BIOS version: 2.1.3
OS version: 2.2.4.32
Reset reason: COLD_POWERON
Last boot: 2008-02-28 14:59:14 PST
Last cluster join: 2008-02-28 14:59:32 PST
Last panic: Never
Last panic request: Never
Error ignore code: 00
SMI context: 00
Last HBA mode: 2a000000
BIOS state: ff 23 26 27 28 29 2b 80
TPD state: 34 40 ff 2a 2c 2e 30 32
Code 128 (BIOS update) - Subcode 0x2020103 (2020102) Thu Feb 28 14:54:18 2008
Code 128 (BIOS update) - Subcode 0x2020102 (2020009) Fri Feb 15 08:10:03 2008
Code 20 (AP Init Failure) - Subcode 0x0 (0) Thu Feb 14 23:34:54 2008
[Repeat] Fri Feb 15 08:41:02 2008
Code 20 (AP Init Failure) - Subcode 0x0 (0) Tue Jan 29 13:58:56 2008
Code 15 (PCI_Fibre_Failure) - Subcode 0x0 (0) Tue Jan 29 13:50:54 2008
[Repeat] Tue Jan 29 13:51:02 2008
Code 15 (PCI_Fibre_Failure) - Subcode 0x0 (5) Tue Jan 29 13:50:38 2008
Code 25 (PROM Failure) - Subcode 0x0 (0) Tue Jan 29 13:49:11 2008
Code 20 (AP Init Failure) - Subcode 0x0 (0) Tue Jan 29 13:05:32 2008
Code 25 (PROM Failure) - Subcode 0x0 (0) Wed Jan 23 15:03:20 2008
Code 25 (PROM Failure) - Subcode 0x0 (0) Mon Jan 21 00:14:45 2008
Code 25 (PROM Failure) - Subcode 0x0 (0) Fri Jan 18 11:38:31 2008
Code 15 (PCI_Fibre_Failure) - Subcode 0x0 (5) Tue Jan 15 18:49:06 2008
In the example above:
• Board revision indicates the HP 3PAR part number for the node board, including any
minor revision codes.
• Assembly indicates the code of the assembly, the year or week the node was produced,
and the node serial number.
• System serial is the cluster serial number.
• BIOS version displays the currently installed BIOS version.
• OS version displays the currently installed OS version.
• Reset reason displays why the board was previously reset. Values can be:
• COLD_POWERON. The node was powered off and back on.
• EXTERNAL_RESET. Another node in the cluster forced the reset.
• WATCHDOG_RESET. A watchdog timer forced the reset.
• PCI_RESET. The node restarted.
• Last boot displays the time the node last started the OS.
• Last cluster join displays the time the node last joined the cluster.
showeeprom 369