HP 3PAR OS 3.1.3 Command Line Interface Reference

shownet
DESCRIPTION
The shownet command displays the configuration and status of the administration network
interfaces, including the configured gateway and Network Time Protocol (NTP) server.
SYNTAX
shownet [option]
AUTHORITY
Any role in the system.
OPTION
–d
Displays detailed information.
SPECIFIERS
None
RESTRICTIONS
None
EXAMPLES
The following example displays the status of the system administration network interfaces:
cli% shownet -d
IP Address: 192.168.5.191 Netmask 255.255.252.0
Assigned to nodes: 01
Connected through node 0
Status: Active
Admin interface on node 0
MAC Address: 00:02:AC:43:00:34
RX Packets: 534389 TX Packets: 121669
RX Bytes: 67828134 TX Bytes: 60638375
RX Errors: 0 TX Errors: 0
RX Dropped: 0 TX Dropped: 0
RX FIFO Errors: 0 TX FIFO Errors: 0
RX Frame Errors: 0 TX Collisions: 0
RX Multicast: 0 TX Carrier Errors: 0
RX Compressed: 0 TX Compressed: 0
Remote copy interface in slot 1 on node 0
MAC Address: 00:04:23:C2:1B:72
RX Packets: 0 TX Packets: 0
RX Bytes: 0 TX Bytes: 0
RX Errors: 0 TX Errors: 0
RX Dropped: 0 TX Dropped: 0
RX FIFO Errors: 0 TX FIFO Errors: 0
RX Frame Errors: 0 TX Collisions: 0
RX Multicast: 0 TX Carrier Errors: 0
RX Compressed: 0 TX Compressed: 0
Remote copy interface in slot 1 on node 0
MAC Address: 00:04:23:C2:1B:73
RX Packets: 0 TX Packets: 0
398 Show Commands