HP 3PAR OS 3.1.3 Command Line Interface Reference

showpdvv
DESCRIPTION
The showpdvv command displays the virtual volumes hat are mapped to a particular physical
disk.
SYNTAX
showpdvv [options] [<PD_ID> [:<chunklet>]...]
AUTHORITY
Any role in the system.
OPTIONS
-sum
Shows number of chunklets used by virtual volumes for different space types for each physical disk.
–p <pattern>
PDs matching the specified pattern are displayed. The following arguments can be specified as
patterns for this option:
NOTE: An item is specified as an integer, a comma-separated list of integers, or a range of
integers specified from low to high.
–nd <item>
Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes
are separated with a single comma (1,2,3). A range of nodes is separated with a hyphen (0–3).
The primary path of the disks must be on the specified node(s).
–st <item>
Specifies one or more PCI slots. Slots are identified by one or more integers (item). Multiple slots
are separated with a single comma (1,2,3). A range of slots is separated with a hyphen (0–3).
The primary path of the disks must be on the specified PCI slot(s).
–pt <item>
Specifies one or more ports. Ports are identified by one or more integers (item). Multiple ports
are separated with a single comma (1,2,3). A range of ports is separated with a hyphen (0–3).
The primary path of the disks must be on the specified port(s).
–cg <item>
Specifies one or more drive cages. Drive cages are identified by one or more integers (item).
Multiple drive cages are separated with a single comma (1,2,3). A range of drive cages is
separated with a hyphen (0–3). The specified drive cage(s) must contain disks.
–mg <item>
Specifies one or more drive magazines. The 1. or 0. displayed in the CagePos column of showpd
output indicating the side of the cage is omitted when using -mg option. Drive magazines are
identified by one or more integers (item). Multiple drive magazines are separated with a single
comma (1,2,3). A range of drive magazines is separated with a hyphen (0–3). The specified
drive magazine(s) must contain disks.
–pn <item>
Specifies one or more disk positions within a drive magazine. Disk positions are identified by one
or more integers (item). Multiple disk positions are separated with a single comma (1,2,3). A
range of disk positions is separated with a hyphen (0–3). The specified position(s) must contain
disks.
428 Show Commands