HP 3PAR OS 3.1.3 Command Line Interface Reference

ManualsBrandsHP ManualsSoftwareHP 3PAR Operating System Software

431

432

433

434

435

436

437

438

439

440

0:0:2 initiator ready 2FF70002AC0000AA 20020002AC0000AA disk FC -

- -

0:0:3 target loss_sync 2FF70002AC0000AA 20030002AC0000AA free FC -

1:0:3 none

0:0:4 target ready 2FF70002AC0000AA 20040002AC0000AA host FC -

- -

0:3:1 target loss_sync 2FF70002AC0000AA 20310002AC0000AA free FC -

1:3:1 none

0:3:2 initiator ready 2FF70002AC0000AA 20320002AC0000AA disk FC -

- -

0:4:1 target ready - 00C0DD086530 iscsi iSCSI -

1:4:1 none

0:4:2 target loss_sync - 00C0DD086532 iscsi iSCSI -

1:4:2 none

0:5:1 initiator ready 2FF70002AC0000AA 20510002AC0000AA disk FC -

- -

0:5:2 target ready 2FF70002AC0000AA 20520002AC0000AA host FC -

1:5:2 none

0:6:1 peer offline - 0002AC53069C rcip IP RCIP0

- -

1:0:1 target ready 2FF70002AC0000AA 21010002AC0000AA host FC -

0:0:1 none

1:0:2 initiator ready 2FF70002AC0000AA 21020002AC0000AA disk FC -

- -

1:0:3 target loss_sync 2FF70002AC0000AA 21030002AC0000AA free FC -

0:0:3 none

1:0:4 initiator ready 2FF70002AC0000AA 21040002AC0000AA host FC -

- -

1:3:1 target loss_sync 2FF70002AC0000AA 21310002AC0000AA free FC -

0:3:1 none

1:3:2 initiator loss_sync 2FF70002AC0000AA 21320002AC0000AA free FC -

- -

1:4:1 target ready - 00C0DD0779C1 iscsi iSCSI -

0:4:1 none

1:4:2 target offline - 00C0DD0779C3 iscsi iSCSI -

0:4:2 none

1:5:1 initiator ready 2FF70002AC0000AA 21510002AC0000AA disk FC -

- -

1:5:2 target ready 2FF70002AC0000AA 21520002AC0000AA host FC -

0:5:2 none

1:6:1 peer offline - 0002AC520041 rcip IP RCIP1

- -

The columns in the previous example are identified as follows:

• N:S:P. The physical position of the port, in the syntax node:slot:port.

• Mode. Indicates whether the port is an initiator, target, or peer. Initiators connect to

disks (default) and target ports connect to hosts or fabrics. A target port that has yet to be

initialized by the system appears as suspended. Ethernet ports use peer mode for remote

copy.

• State. State of the port. Possible values vary according to whether the port is an Ethernet or

Fibre Channel port.

◦ config_wait. Configuration waiting.

◦ alpa_wait. ALPA waiting.

◦ login_wait. Login waiting.

◦ ready. Link is ready.

◦ loss_sync. Link loss sync.

showport 433