HP 3PAR OS 3.1.3 Command Line Interface Reference

0:3:1 ready offline
0:3:1 ready offline
0:5:1 ready loss_sync
--------------------------------
10
The columns in the previous example are identified as follows:
• N:S:P. The physical position of the port, in the syntax node:slot:port.
• State. State of the port. The states are as follows:
config_wait. The link configuration is waiting.◦
◦ alpa_wait. The link ALPA is waiting.
◦ login_wait. The link login is waiting.
◦ ready. The link is online and ready for use.
• Detailed State. Detailed state of the port.
loss_sync.The link is not physically connected to anything.◦
◦ error. The link has an error.
◦ non_participate. The link is not participating.
◦ taking_coredump. The link is a taking a core dump.
◦ offline. The link is offline.
◦ fw_dead. The links firmware is dead.
◦ link_idle_for_reset. The link is idle and ready for reset.
◦ dhcp_in_progress. The link DHCP is in progress.
◦ pending_reset. The link reset is pending.
◦ unknown. The link state is unknown.
The following example displays information about RCIP ports:
cli% showport -rcip
N:S:P State ---HwAddr--- IPAddr Netmask Gateway MTU Rate Duplex AutoNeg
0:1:1 offline 000423C21B72 - - - - n/a n/a n/a
0:1:1 offline 000423C21B73 - - - - n/a n/a n/a
1:2:1 offline 000423ADE95E - - - - n/a n/a n/a
1:2:1 offline 000423ADE95F - - - - n/a n/a n/a
The columns in the previous example are identified as follows:
• N:S:P. The physical position of the port, in the syntax node:slot:port.
• State. State of the port.
ready. The port is online and ready for use.◦
◦ loss_sync.The port is not physically connected to anything.
◦ config_wait. Firmware has yet to be initialized.
◦ login_wait. FC adapter is attempting port and process logins with all loop ports.
showport 437