HP 3PAR OS 3.1.3 Command Line Interface Reference

showportisns
DESCRIPTION
The showportisns command shows iSNS host information for iSCSI ports in the system.
SYNTAX
showportisns [<N>:<S>:<P>]
AUTHORITY
Any role in the system.
OPTIONS
None
SPECIFIERS
[<n:s:p>]
Specifies the port for which information about devices on that port are displayed.
node
Specifies the node.
slot
Specifies the PCI bus slot in the specified node.
port
Specifies the iSCSI port number of the PCI card in the specified PCI bus slot.
If not specified, iSNS host information for all iSCSI ports is displayed.
EXAMPLES
The following example displays hosts discovered by the iSCSI port from the iSNS server in the
system.
cli% showportisns
N:S:P Host_IPAddr -------------------Host_iSCSI_Name-------------------
Host_alias
1:3:1 192.168.2.181 iqn.1991-05.com.microsoft:pe750-07 <MS SW iSCSI
Initiator>
1:3:1 192.168.17.33 iqn.1991-05.com.microsoft:dt-ashok-xp.hq.3pardata.com <MS SW iSCSI
Initiator>
Where
• N:S:P. Represents the node:slot:port of the iSCSI port.
• Host_IPAddr. The IP address of a remote host.
• Host_iSCSI_Name. Represents the iSCSI name of the host.
• Host_alias. Represents the iSCSI alias of the host.
NOTES
None
444 Show Commands