HP 3PAR OS 3.1.3 Command Line Interface Reference

4 Admit Commands
admithw
DESCRIPTION
The admithw command admits new hardware into the system.
AUTHORITY
Super, Service
NOTE: You need access to all domains in order to run this command.
SYNTAX
admithw [options]
OPTIONS
–checkonly
Only performs passive checks; does not make any changes.
–f
If errors are encountered, the admithw command ignores them and continues. The messages remain
displayed.
nopatch
Suppresses the check for drive table update packages for new hardware enablement.
SPECIFIERS
None
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example displays a passive check of the system:
cli% admithw -checkonly
Checking nodes...
Checking volumes...
Checking system LDs...
Checking ports...
Checking state of disks...
Checking cabling...
Check complete.
NOTES
• The admithw command handles any nodes, disks, or cages that have been added into the
system.
• In addition to verifying that all expected hardware is present, the admithw command handles
all checks, including valid states, cabling, and firmware revisions.
admithw 45