HP 3PAR OS 3.1.3 Command Line Interface Reference

Target Information
Name ID Type Status Options Policy
System2 9 IP ready mirror_config
Link Information
Target Node Address Status Options
System2 0 10.100.33.11 Up
System2 1 10.101.33.11 Up
receive 0 10.100.33.11 Up
receive 1 10.101.33.11 Up
Group Information
Name Target Status Role Mode Options
sync_group_1 System2 Started Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 391 remotevv.0 351 Syncing (25%) Thu Dec 14 17:37:40 PST 2006
localvv.1 392 remotevv.1 352 Syncing (40%) Thu Dec 14 17:37:40 PST 2006
Name Target Status Role Mode Options
sync_group_2.r11 System2 Started Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 401 localvv.0 361 Syncing NA
remotevv.1 402 localvv.1 362 Syncing NA
The following values can appear in the TargetInformationStatus field:
• new. The target’s link have yet to come up.
• ready. The target has connected links.
• unsupported. The target system’s TPD version is not compatible with this system’s version.
• failing. The target’s links have all failed, but its groups have not been stopped.
• failed. The target’s links have all failed and its groups have been stopped.
The following values can appear in the Link InformationStatus field:
• Not Started. Link is not started or is being started, such as when its node is down or remote
copy is stopped (through the stoprcopy command).
• Down. Link is down and will attempt to restart.
• Up. Link is up and running.
The following values can appear in the Group InformationSyncstatus field:
• New. Volume is configured, but has not yet been started.
• Syncing. Volume is currently synchronizing.
• NotSynced. The volume is not synchronized, likely the result of an initial sync failure or some
other failure.
• Stopped. The volume was synced the last time the group was started, but the group is currently
stopped. There might be writes that have not been sent to the secondary site.
• Stale. Volume was previously synchronized, but a previous synchronization attempt failed.
Thus, the secondary has a valid copy, just not a valid copy from the last synchronization
attempt.
452 Show Commands