HP 3PAR OS 3.1.3 Command Line Interface Reference

showrctransport
DESCRIPTION
The showrctransport command shows status and information about end-to-end transport for
remote copy in the system.
SYNTAX
showcrtransport [options]
AUTHORITY
Any role in the system.
OPTIONS
–rcip
Show information about Ethernet end-to-end transport.
–rcfc
Show information about Fibre Channel end-to-end-transport.
SPECIFIERS
None
RESTRICTIONS
None
EXAMPLES
The following example displays status and information about the end-to-end transport for all
remote-copy configured ports:
# showrctransport
N:S:P Peer_Address Address State Type
0:5:1 - 172.100.5.87 new rcip
1:5:1 - 172.101.6.87 new rcip
The columns in the previous example are identified as follows:
• N:S:P. The physical position of the port, in the syntax node:slot:port.
• Peer_Address. IP address of the remote-copy storage server port connected to this
remote-copy port.
• Address. IP address of the remote-copy storage server port.
• State. Remote copy end-to-end transport state. Can include one of the following results:
new. Configuration is not completed on this port.◦
◦ incomplete. Configuration is not yet completed on the peer port.
showrctransport 455