HP 3PAR OS 3.1.3 Command Line Interface Reference

showsys
DESCRIPTION
The showsys command displays the HP 3PAR storage system properties includes system name,
model, serial number, and system capacity information, etc.
SYNTAX
showsys [options]
AUTHORITY
Any role in the system.
OPTIONS
–d
Specifies that more detailed information about the system is displayed.
–param
Specifies that the system parameters are displayed.
–fan
Displays the system fan information.
–space
Displays the system capacity information in MB (1048576 bytes).
–domainspace
Displays the system capacity information broken down by domain in MB (1048576 bytes).
–desc
Displays the system descriptor properties.
–devtype FC|NL|SSD
Displays the system capacity information where the disks must have a device type string matching
the specified device type; either Fibre Channel (FC), nearline (NL), solid state drive (SSD). This
option can only be issued with the -space option.
SPECIFIERS
None
RESTRICTIONS
None
EXAMPLES
The following example displays information about an HP 3PAR storage system:
cli% showsys
---------------(MB)----------------
ID -Name- ---Model--- -Serial- Nodes Master TotalCap AllocCap FreeCap FailedCap
15 s015 InServ T400 1000015 2 0 1063424 208384 855040 0
In the previous example:
• ID. The system ID.
• Name. The system name.
474 Show Commands