HP 3PAR OS 3.1.3 Command Line Interface Reference

showsysmgr
DESCRIPTION
The showsysmgr displays startup state information about the system manager.
SYNTAX
showsysmgr [options]
AUTHORITY
Any role in the system.
OPTIONS
-d
Shows additional detailed information if available.
-l
Shows field service diagnostics for locking, and ioctl system calls.
None
SPECIFIERS
None
RESTRICTIONS
None
EXAMPLES
The following example displays the startup state information about the system manager. In this
example, the system manager reports that it is up and running.
cli% showsysmgr
System is up and running from Thu May 24 15:39:22 PDT 2007
If the system has experienced a power failure, issuing the showsysmgr command displays the
following message:
cli% showsysmgr
System is recovering from a previous powerfailure. Please use the CLI commands for
'showvv', 'showld', 'showpd' to see any unstarted vvs, lds, pds.
If the system has attempted powerfail recovery three times, and during the recovery attempts
encountered kernal panics because of hardware or software errors, the following message is
displayed. See “NOTES” (page 478) in the following section for additional information.
cli% showsysmgr
System is recovering from a previous power failure.
Please use the 'showvv', 'showld', 'showpd' CLI commands to
check for not started vvs, lds, pds.
Use force_idewipe to wipe pfail partititon and restart system with all
lds/vvs being checked. This can cause some data to be lost.
showsysmgr 477