HP 3PAR OS 3.1.3 Command Line Interface Reference

showtarget
DESCRIPTION
The showtarget command displays information about unrecognized targets.
SYNTAX
showtarget [<Node_WWN>...]
showtarget -lun <Node_WWN>...
showtarget <-inq|-mode> [-page <num>] [-d] <LUN_WWN>...
showtarget -rescan
AUTHORITY
Any role in the system.
OPTIONS
-lun
Display the information for remote LUNs.
-inq
Display the SCSI inquiry page information.
-mode
Display the SCSI mode page information.
-page <page_num>
Specify the SCSI page number for the inquiry and mode information. For SCSI inquiry information,
the valid <page_num> is 0, 80, and 83. For SCSI mode information, the valid <page_num> is
3 and 4. This option needs to be used together with -inq or -mode. If this option is not specified,
the default <page_num> is 0.
-d
Display detailed information for the SCSI inquiry or mode page.
-rescan
Rescan the port to find the unknown target.
SPECIFIERS
<Node_WWN>
Indicates the World Wide Name (WWN) of the node.
<LUN_WWN>
Indicates the World Wide Name (WWN) of a LUN exported from an unknown target.
RESTRICTIONS
None
EXAMPLES
The following example displays information about unrecognized targets:
cli% showtarget
Port ----Lun_WWN----- ----Port_WWN---- ---State---
showtarget 479