HP 3PAR OS 3.1.3 Command Line Interface Reference

2 test.2 sun 210000E08B023C71 1:5:1 host

3 test.3 sun 210000E08B023C71 1:5:1 host

-----------------------------------------------

VLUN Templates

Lun VVname Host ----Host_WWN---- Port Type

2 tpv.2 pe750–07 ---------------- --- host

3 tpv.3 pe750–07 ---------------- --- host

2 test.2 sun ---------------- --- host

3 test.3 sun ---------------- --- host

----------------------------------------------

The columns in the previous examples are identified as follows:

• Lun. The LUN to which the virtual volume is exported.

• VVname. The name of the exported virtual volume.

• Host. The name of the host to which the virtual volume is exported. In the Templates section,

the port-presents rule contains no value.

• Host_WWN. The WWN of the host to which the virtual volume is exported. In the Templates

section, dashes mean this column does not apply.

• Port. The port (node:slot:port) on which the host to which the virtual volume is exported

appears. In the Templates section, the host-sees rule contains dashes.

• Type. The type of export rule that is applied when the virtual volume is exported. Possible

entries are port for port-presents, host for host-sees, hostset for host-set VLUNs,

matched-set for matched-set.

NOTES

• A Domain column may be included by using the setclienv command to set listdom to

1. The listdom option is also set to 1 if the CLI was started with the -listdom option or if

the CLI was started with the TPDLISTDOM environment variable set. Please run cli -h and

setclienv -h for details of the environment variables.

• See “Glob-Style Pattern” (page 12) for more information.

496 Show Commands