HP 3PAR OS 3.1.3 Command Line Interface Reference
• Type. Indicates the copy type of virtual volume and can be one of the following:
base. Base volume (not a copy).◦
◦ pcopy. Physical copy (full copy).
◦ vcopy. Snapshot copy (virtual copy).
◦ peer. Remote volume admit into the local HP 3PAR storage system.
• State. The state of the virtual volume.
normal. The virtual volume is operating normally.◦
◦ failed. The virtual volume is operating abnormally.
◦ degraded. The virtual volume is degraded.
• Detailed_State. The detailed state of the logical disk.
lds_not_started. The logical disks are not started.◦
◦ not_started. The virtual volumes are not started.
◦ needs_check. The logical disks needs to be checked for consistency.
◦ needs_maint_check. A maintenance check is required.
◦ internal_consistency_error. An internal consistency error has been encountered.
◦ snapdata_invalid. The Snapdata is invalid.
◦ preserved. One or more sets of a logical disk is unavailable due to missing chunklets
and the remaining virtual volume data is preserved in a preserved data logical disk.
◦ stale. Parts of the virtual volume contain old data because a copy-on-write operation
failed.
◦ copy_failed. A promote or copy to this volume failed.
◦ degraded_avail. The availability of the virtual volume is degraded.
◦ degraded_perf. The performance of the virtual volume is degraded.
◦ promoting. The volume is currently the target of a promote.
◦ copy_target. The volume is currently the target of a copy.
◦ resync_target. Volume is currently the target of a resync copy.
◦ tuning. The volume is currently tuning.
◦ closing. The volume is currently closing.
◦ removing. The volume is currently removing.
◦ creating. The volume is currently creating.
◦ copy_source. The volume is a copy source.
◦ unknown. The volume state is unknown.
506 Show Commands