HP 3PAR OS 3.1.3 Command Line Interface Reference

statiscsisession
DESCRIPTION
The statiscsisession command displays the iSCSI session statistics.
SYNTAX
statiscsisession [options <arg>]
AUTHORITY
Any role in the system.
OPTIONS
-d <secs>
Looping delay in seconds <secs>. The default is 2.
-iter <number>
The command stops after a user-defined number of iterations.
-nodes <nodelist>
List of nodes for which the ports are included.
-slots <slotlist>
List of PCI slots for which the ports are included.
-ports <portlist>
List of port slots for which the ports are included. Lists are specified in a comma-separated manner
such as: -slots 0,1,2 or -slots 0.
-counts
Shows the counts. The default is to show counts/sec.
By default, the differences from initiating the command are shown. The following options change
that behavior:
-prev
Shows the differences from the previous sample.
-begin
Shows the values from when the system was last initiated.
SPECIFIERS
None
RESTRICTIONS
None
EXAMPLES
The following example displays the session statistics for the iSCSI:
cli% statiscsisession
15:31:35 04/04/06 --From start of
statiscsisession command---
----PDUs/s----
--KBytes/s--- ----Errs/s----
port ----------------------iSCI_Name---------------------- TPGT Cmd Resp Total Tx
statiscsisession 607