HP 3PAR OS 3.1.3 Command Line Interface Reference

statrcopy
DESCRIPTION
The statrcopy command displays statistics for remote-copy volume groups.
SYNTAX
statrcopy [options <arg>]
AUTHORITY
Any role in the system.
OPTIONS
–d <secs>
Specifies the interval, in seconds, that statistics are sampled using an integer from 1 through
2147483. If no interval is specified, the option defaults to an interval of two seconds.
–iter <number>
Specifies that I/O statistics are displayed a specified number of times as indicated by the num
argument using an integer from 1 through 2147483647.
–u k|m|g
Displays statistics as kilobytes (k), megabytes (m), or gigabytes (g). If no unit is specified, the default
is kilobytes.
–hb
Specifies that the heartbeat round-trip time of the links should be displayed in addition to the link
throughput.
SPECIFIERS
None
RESTRICTIONS
This command requires the HP 3PAR Remote Copy Software license. Contact your local service
provider for more information.
EXAMPLES
The following example shows statistics for sending links link0 and link1:
# statrcopy
17:37:01 05/17/07 -Throughput(KBytes per sec)-
Target Node Address IPC Total(KBytes) Current Average
---------------------------------------------------------------------------
amp1 0 10.100.33.96 RCs041 404761.15 4.95 4.95
amp1 1 10.101.33.96 RCs142 404661.63 3.30 3.30
---------------------------------------------------------------------------
amp1 809422.78 8.25 8.25
amp2 0 10.100.33.11 RCs037 86845920.00 24612.95 24612.95
amp2 1 10.101.33.11 RCs138 85299712.32 23217.30 23217.30
---------------------------------------------------------------------------
amp2 172145632.32 47830.26 47830.26
receive 0 receive RCr039 983110.14 27.32 27.32
receive 1 receive RCr140 823292.09 23.37 23.37
---------------------------------------------------------------------------
626 Stat Commands