HP 3PAR OS 3.1.3 Command Line Interface Reference

Receive 1806402.23 50.69 50.69
Send 172955055.10 47838.51 47838.51
---------------------------------------------------------------------------
Total 174761457.34 47889.20 47889.20
Press the enter key to stop...
The columns in this example provide the following information:
• Target. The system name of the actual link process that is running.
• Node. The node that the link is running on.
• Address. The IP address of the remote node.
• IPC. The mode of the remote-copy link (r) Receive or (s) Send.
• Total KBytes. The amount of data that has been transmitted since the link was started, in
KB.
• Throughput(KBs). The throughput on the link after the last iteration.
• Current. The amount of current transmitted since the last statrcopy iteration, in KB.
• Average. The average speed of the data transmission, in KB/s.
NOTES
• This command repeats until directed to stop.
• Within the context of this command, KB is 1000 bytes, MB is 1000 KB, and GB is 1000 MB.
• The numbers displayed by this command might be somewhat less than those displayed with
statport, as statrcopy output does not include TCP/IP overhead.
statrcopy 627