HP 3PAR OS 3.1.3 Command Line Interface Reference
stoprcopy
DESCRIPTION
The stoprcopy command disables the remote-copy functionality for any started remote-copy
volume groups.
SYNTAX
stoprcopy [options]
AUTHORITY
Super, Edit
Any role granted the rcopy_stop right.
NOTE: You must have access to all domains to run this command.
OPTIONS
–f
Specifies that any started copy will not ask for confirmation for the -clear option.
–stopgroups
Specifies that any started remote-copy volume groups are stopped.
–clear
Specifies that configuration entries affiliated with the stopped mode are deleted.
CAUTION: Issuing the stoprcopy -clear command completely removes the remote-copy
setup and is NOT reversible.
SPECIFIERS
None
RESTRICTIONS
None
EXAMPLES
The following example disables the remote-copy functionality of all primary remote-copy volume
groups:
# stoprcopy –stopgroups
NOTES
• If the -stopgroups option is not used, all groups must already be stopped.
• An older version of this command provided specifiers to disable the primary or backup systems.
These specifiers were deprecated in HP 3PAR OS release 2.2.3.
• Unless the -stopgroups option is used, the command will fail if there are any remote-copy
groups that are started. If the -clear option has been used, the configuration is completely
erased. Consequently, remote-copy operations cannot be restarted using only the startrcopy
command. The configuration must be rebuilt. Therefore, the -clear option requires
confirmation with the -f option, the TPDFORCE environment variable, or by interactively
stoprcopy 641