HP 3PAR OS 3.1.3 Command Line Interface Reference

EXAMPLES
The following example backs up the keystore to file backup1:
cli% controlencryption backup backup1
The following example restores the keystore from file backup1:
cli% controlencryption restore backup1
NOTES
The keystore must be backed up to prevent total loss of data. A password must be supplied (twice)
on backup. The same password must be supplied on restore. For enable and rekey, there must be
no failed disks.
Because the backup needs to be stored off the nodes, all subcommands other than status need to
be executed using a version of the CLI running on a remote system.
The Data Encryption license is required to use the enable subcommand. Also all disks must be
SED.
The Data Encryption license is required to use the enable subcommand. Also all disks must be
SED. If the state shows recovery_needed, the enableor last rekey subcommand failed. Re-issue
the operation to fix this state.
82 Control Commands