HP 3PAR OS 3.1.3 Release Notes

DescriptionItemIssue ID
Changes to DiskDriveLite subprofile:
• add properties LocationIndicator, Encryption, FormFactor to
TPD_DiskDrive
• add ExtentDiscriminator property to TPD_StorageVolume and
TPD_DiskStorageExtent
• new TPD_AssociatedPrimordialDisks association between
DiskStorageExtents and the Primordial StoragePool
Masking and Mapping:
• new AssociatedPrivilege association between StorageHardwareID
and SCSIProtocolController. The AssociatedPrivilege association is
implemented by the new classes: TPD_iSPCAssociatedPrivilege and
TPD_SPCAssociatedPrivilege
Replication Services Profile:
• support for the following extrinsic methods: CreateListReplica,
GetPeerSystem, CreateGroupReplicaFromElements,
GetReplicationRelationshipInstances
• add ConsistentPointInTime property to TPD_RemoteReplicationGroup
and TPD_ReplicationGroup
• add TPD_RemoteReplicationCollection and its' association classes
TPD_MemberOfRemoteReplicationCollection,
TPD_ReplicationAffectsRemoteCollection, and
TPD_HostedRemoteReplicationCollection
FC/FCoE Initiator Ports:
• expanded support for TPD_FCPort.PortDiscriminator property
iSCSI Target Ports:
• updated TPD_iSCSICpabilities.SupportedFeatures property to set
iSCSISession capability
Array Profile:
• new class TPD_ImplmementationCapabilities with
SupportedCapacityOptimizations property that indicates
ThinProvisioning
The defrag timer shared between the two SD spaces, SD and SD2,
gets reset incorrectly during a check for SD even before SD2 is checked
The defrag timer shared between
the two SD spaces, SD and SD2,
90118
for defrag thus postponing the triggering of defrag task for SD2. Thisgets reset incorrectly during a check
is resolved by modifying the logic so as to increment the defrag timerfor SD even before SD2 is checked
only once after the check for both SD and SD2 are completed only if
necessary.
for defrag thus postponing the
triggering of defrag task for SD2.
The Emulex FC driver generates an alert when the number of initiators
per port goes over the maximum limit of 128.
New alert when the number of
initiators per port goes over the
limit.
90347
The Qlen (WQlen for srstatqos) field value is not calculated
correctly. This is resolved.
The Qlen (WQlen for srstatqos)
field value is not calculated
correctly.
90493
The SAS driver code is modified to improve the array's back end
command abort processing. It detects and attempts to correct the chip
For HP 3PAR OS 3.1.2, during a
chip fault the SAS driver
90994
fault automatically, via a chip reset, when the driver detects the abort
requests timing out.
experiences issues with abort
processing, abort timeouts and
eventually a FW core is taken
because high-priority credit is not
free.
Reclaim Queues are introduced to avoid the long times the system takes
to recover space from the deleted snapshots.
The system takes long time to
recover space from the deleted
snapshots.
91112
16 HP 3PAR OS 3.1.3 Release Notes