HP 3PAR OS 3.1.3 Release Notes

DescriptionItemIssue ID
An issue where the tuneld phase of tunesys can exit
unexpectedly. This might happen when AO is moving
Tunesys tuneld phase can exit unexpectedly.100880
a region in an LD and tunesys runs tuneld on the
LD or compactcpg on the related CPG. This is
resolved.
HP_3PAR was used as new vendor prefix in SMI-S
since 3.1.2. The parser function fails to extract values
Failure in parsing legacy InstanceID of a
TPD_DynamicStoragePool.
101374
if the old prefix is used in the CIM request. Without
proper checking, incorrect CPGs are returned in the
first element of query. This is resolved by adding
validations to handle the case.
The reply from get CPG operation /api/v1/cpgs
through Web Services API do not contain RAIDType
member if CPG is RAID 1. This is resolved.
CPG RAID type is not reported if it is 0.101447
QLE8242 CNA firmware could generate a large
number of pause frames causing Cisco switch ports
QLE8242 CNA firmware may cause Cisco switch
ports to shut down.
102367
to shut down. This is resolved by the new QLE8242
firmware.
If the version setting of SNMP manager gets
changed, the entry is not deleted with
removesnmpmgr command. This is resolved.
The removesnmpmgr command may not delete
SNMP manager.
102375
Enhanced persistent ports feature to allow failover
of 'matched set' VLUNs. Previously, only 'host sees'
LUNs will not failover or failback without manual
intervention
102397
VLUNs were allowed to failover. This new capability
can be enabled/disabled using one of these CLI
commands:
• setsys FailoverMatchedSet yes
• setsys FailoverMatchedSet no
Large remote copy volume resync may take a
considerable amount of time if any failed IO exist
Long resync time for large remote copy volumes if
any failed IO exist.
103288
since the code will not skip empty areas. This is
resolved.
System Reporter does not require a license for the
srpdspace and srrgiodensity commands, but
The on-node System Reporter requires a license for
all commands.
103491
on-node System Reporter requires a license for all
commands. This is now changed and no license is
required for on-node System Reporter.
When more than half of the disks are missing, the
system will treat it as a power failure condition and
System now allows greater control when critical
amounts of disks are missing.
103504
perform a powerfail save after 3 minutes. Previously,
most commands could be blocked during this period.
The system has been enhanced to permit more to be
done during this time, allowing for the possible
prevention of this powerfail save.
SNMPAgent was broken due to passing incorrect
argument of data buffer. Using input instead output
The SNMP Agent stops working with SNMPv3.103733
buffer causes the failure of AES encoding and
decoding. This is resolved.
A condition exists in the SCSI driver where a mutex
lock is not acquired and it can cause a node error.
This is resolved.
A mutex lock is not acquired and it can cause a
node error.
104216
Upgrades to OS 3.1.3 MU1 now complete correctly
without manual use of admithw scheds
The admithw scheds command must be used
after an upgrade to HP 3PAR OS 3.1.3.
104955
34 HP 3PAR OS 3.1.3 MU1 Release Notes