HP 3PAR OS 3.1.3 Upgrade Instructions

16:44.54 Checking health of file
16:44.55 Checking health of ld
16:44.56 Checking health of license
16:44.56 Checking health of network
16:44.57 Checking health of node
16:44.59 Checking health of pd
16:45.05 Checking health of pdch
16:45.06 Checking health of port
16:45.14 Checking health of rc
16:45.14 Checking health of snmp
16:45.15 Checking health of sp
16:45.15 Checking health of task
16:45.16 Checking health of vlun
16:45.16 Checking health of vv
4. After the health check completes gathering the data, the SP displays a list of files to view.
4.4.2 Show latest health check status from InServ
Available files
1 ==> /sp/prod/data/files/1300338/status/110420.101029.all
2 ==> /sp/prod/data/files/1300338/status/110420.101029.det
3 ==> /sp/prod/data/files/1300338/status/110420.101029.err
4 ==> /sp/prod/data/files/1300338/status/110420.101029.sum
0 ==> Abort Operation
Please select a file to display
To view the available files, type the corresponding number and press Enter to continue.
Select the number corresponding to the data file with the .all extension and press Enter.
After the file is reviewed, press Enter to continue, and then select option 0 to exit health check.
NOTE: The SPMAINT utility uses the more command to view files. Press the spacebar to
move to the next page. After viewing the contents of the file, to exit press Enter. Then select
0 (Abort Operation) to return to the previous menu. After you return to the previous
menu, the report is discarded. To view the health status again, run the health check again.
5. Review and correct any exceptions before performing an HP 3PAR OS update.
Performing Validation Routines
WARNING! In case of a failure of any test, it must be escalated to HP 3PAR Authorized Support
Provider so that issues, if any, might be corrected before the HP 3PAR OS update. Failure to resolve
an issue before the software update might cause unpredictable results.
To perform validation routines:
14 Pre-Update Tasks