HP 3PAR OS 3.1.3 Upgrade Instructions

1. From the SPMAINT main menu, check the status of the system on which validation routines
are to be performed. To check the status of the system, enter: =4.7.1 on the SPMAINT main
menu and press Enter.
4.7.1 StoreServ Upgrade Status
Configured StoreServs
1 ==> s945 --> 1699945
0 ==> Abort Operation
Please select a StoreServ to operate on
2. Select the system and press Enter.
4.7.1 StoreServ Upgrade Status
StoreServ: s945
Current Version: 3.1.2.484
Upgrade Status:
System is not currently undergoing an online upgrade.
First node to be rebooted is node 3
Which will be followed by node 0
Which will be followed by node 2
Which will be followed by node 1
**MESSAGE: START State, No TPD upgrade in progress
**STATE:0
3. Press Enter to continue.
4. From the SPMAINT main menu, validate the system to ensure it is capable of performing an
online update. To validate the system, enter: =4.7.2 on the SPMAINT main menu and press
Enter.
4.7.2 Validate Upgrade Status
Configured StoreServs
1 ==> s945 --> 1699945
0 ==> Abort Operation
Please select a StoreServ to operate on
5. Select the system to perform the prevalidation scripts on, then press Enter.
Any problems discovered during the prevalidation checks must be resolved and then
prevalidation checks must be repeated.
4.7.2 Validate Upgrade Status
-- Test Name -------------------------------------------------------- [ RESULT ]
-
Check Cluster Core Flags [ PASSED ]
Performing Validation Routines 15