HP 3PAR Solaris Implementation Guide

ManualsBrandsHP ManualsSoftwareHP 3PAR Operating System Software

Initial Ready To Transfer (R2T): yes/-

Max Burst Length: 262144/-

Max Outstanding R2T: 1/-

Max Receive Data Segment Length: 8192/-

Max Connections: 1/-

Header Digest: NONE/NONE

Data Digest: NONE/NONE

Configured Sessions: 1

Target: iqn.2000-05.com.3pardata:20320002ac0000af

Alias: -

Bi-directional Authentication: enabled

Authentication Type: NONE

Data Sequence In Order: yes/-

Data PDU In Order: yes/-

Default Time To Retain: 20/-

Default Time To Wait: 2/-

Error Recovery Level: 0/-

First Burst Length: 65536/-

Immediate Data: yes/-

Initial Ready To Transfer (R2T): yes/-

Max Burst Length: 262144/-

Max Outstanding R2T: 1/-

Max Receive Data Segment Length: 8192/65536

Max Connections: 1/-

Header Digest: NONE/-

Data Digest: NONE/-

Configured Sessions: 1

iscsiadm list initiator-node

Initiator node name: iqn.1986-03.com.sun:01:00144fb0534c.4a4e0673

Initiator node alias: -

Header Digest: NONE/NONE

Data Digest: NONE/NONE

Authentication Type: NONE

RADIUS Server: NONE

RADIUS access: unknown

Configured Sessions: 1

On the HP 3PAR StoreServ Storage, remove CHAP for the host:

# sethost removechap solarisiscsi

Enabling Bidirectional (Mutual) CHAP

To set bidirectional CHAP, a host definition must already be defined on the HP 3PAR StoreServ

Storage.

The HP 3PAR OS CLI sethost initchap and sethost targetchap commands are used to

set bidirectional CHAP on the HP 3PAR StoreServ Storage as described in the following steps.

1. On the HP 3PAR StoreServ Storage, create and verify the host and target CHAP secrets.

# sethost initchap -f host_secret0 solarisiscsi

# sethost targetchap -f target_secret0 solarisiscsi

# showhost -chap

Configuring CHAP Authentication (Optional) 23