HP 3PAR Solaris Implementation Guide

---

Max Receive Data Segment Length: 65536

---

4. Issue the iscsiadm list target -v command to list all the negotiated login parameters:

# iscsiadm list target -v

Target: iqn.2000-05.com.3pardata:21310002ac00003e

Alias: -

TPGT: 1

ISID: 4000002a0000

Connections: 1

CID: 0

IP address (Local): 11.1.0.40:33672

IP address (Peer): 11.1.0.110:3260

Discovery Method: SendTargets

Data Sequence In Order: yes

Data PDU In Order: yes

Default Time To Retain: 20

Default Time To Wait: 2

Error Recovery Level: 0

First Burst Length: 65536

Immediate Data: no

Initial Ready To Transfer (R2T): yes

Max Burst Length: 262144

Max Outstanding R2T: 1

Max Receive Data Segment Length: 65536

Max Connections: 1

Header Digest: NONE

Data Digest: NONE

5. (Optional) You can enable CRC32 verification on the datadigest (SCSI data) and headerdigest

(SCSI packet header) of an iSCSI PDU in addition to the default TCP/IP checksum. However,

enabling this verification will cause a small degradation in the I/O throughput.

The following example modifies the datadigest and headerdigest for the initiator:

# iscsiadm modify initiator-node -d CRC32

# iscsiadm modify initiator-node -h CRC32

# iscsiadm list initiator-node

Initiator node name: iqn.1986-03.com.sun:01:0003bac3b2e1.45219d0d

Initiator node alias: -

Header Digest: NONE/CRC32

Data Digest: NONE/CRC32

# iscsiadm list target -v

Target: iqn.2000-05.com.3pardata:20310002ac00003e

Header Digest: CRC32

Data Digest: CRC332--

Setting Up Multipathing Using Solaris StorEdge Traffic Manager

Solaris StorEdge Traffic Manager (SSTM) is the multipathing software that comes bundled with

Solaris 10 and 11.

48 Configuring the Host for an iSCSI Connection