HP 3PAR StoreServ 7450 Storage Service Guide

4. Remove the replacement disk drive from its packaging. To reinstall a new disk drive, see
“Installing a Disk Drive” (page 29).
Figure 32 7200 and 7400 Two Node System (HP M6710 Drive Enclosure)
Removing a 3.5 inch Disk
To remove a 3.5 inch disk drive:
1. Pinch the latch in the handle towards the hinge to release the handle.
2. Gently pull the disk drive out approximately one inch and wait 30 seconds.
3. Slide the disk drive out of the enclosure and set aside.
4. To reinstall a new disk drive, see “Installing a Disk Drive” (page 29).
Figure 33 Removing a 3.5 inch disk drive
28 Servicing the Storage System