HP 3PAR StoreServ 7450 Storage Service Guide

Installing a Disk Drive
CAUTION: Blank disk drive carriers are provided and must be used if all slots in the enclosure
are not filled with disk drives.
CAUTION: To avoid potential damage to equipment and loss of data, handle disk drives carefully.
NOTE: All drives in a vertical column of an LFF drive enclosure must be the same speed and
type.
Installing a 2.5 inch disk drive (SFF)
1. Press the handle latch to open the handle.
2. Insert the disk drive into the enclosure with the handle opened from the top in the vertical
position.
3. Slide the disk drive into the enclosure until it engages. Push firmly until it clicks.
Figure 34 7200 and 7400 Two Node System
4. Observe the newly installed disk drive for 60 seconds to verify the amber LED turns off and
remains off for 60 seconds.
Installing a 3.5 inch disk drive (LFF)
1. Press the handle latch to open the handle.
2. Position the disk drive so the handle opens from the left and slide it into the enclosure.
Repairing a Disk Drive 29