HP 3PAR Recovery Manager 1.1.0 Software for Microsoft Hyper-V User Guide (QL226-96343, June 2013)

ManualsBrandsHP ManualsSoftwareHP 3PAR Recovery Manager Software for Microsoft Hyper-V F400 Media LTU

Table 22 Set-RmhPolicy parameters

DescriptionOptional/RequiredParameter

Host name of the RMH Server. This is

FQDN or IP address.

Required-RmhServerName

Optionally select Hyper-V host/cluster

to use. If not specified, Hyper-V

Required-HypervName

host/cluster must be selected using

Select-Hyperv. This is FQDN or IP

address. Synonyms for Hyper-V are

supported. The localhost is not

supported.

Name/unique id of VM to set policy

for Virtual Machine.

Required-VmNameUuid

Integer value followed by letter h or d

for Hours and Days respectively. Use 0

to reset.

Optional-Expiry

Integer value followed by letter h or d

for Hours and Days respectively. Use 0

to reset

Optional-Retention

Disabled or enabled. Use reset to

reset.

Optional-SavedStateBackups

Displays progress messagesOptional-Verbose

Get-ClusterNodeNames

The Get-ClusterNodeNames command retrieves cluster node names for the Hyper-V cluster.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Get-ClusterNodeNames -RmhServerName <RmhServerName> -HypervName

<HypervName> [-Verbose]

Table 23 Get-ClusterNodeNames parameters