HP 3PAR Recovery Manager 1.1.0 Software for Microsoft Hyper-V User Guide (QL226-96343, June 2013)

Get-VirtualMachine -RmhServerName <RmhServerName> -HypervName
<HypervName> [-Verbose]
Table 26 Get-VirtualMachine parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Required-HypervName
host/cluster must be selected using
Select-Hyperv. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Displays progress messages.Optional-Verbose
The command returns multiple RMHirtualMachineInfo objects.
Show-Connection
Show-Connection displays connection information for current login RMH user name, all RMH
Hyper-V hosts/clusters, and all Hyper-V Storage Systems associated with the user. The actively
selected Hyper-V will also be shown.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Show-Connection -RmhServerName <RmhServerName> [-HypervName]
[-ShowMissingStorageSystems] [-Verbose]
Table 27 Show-Connection parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Optional-HypervName
host/cluster must be selected using
Select-Hyperv. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
If specified, Storage Systems used by
Hyper-V(s), but missing credentials, are
shown.
Optional-ShowMissingStorageSystems
Displays progress messages.Optional-Verbose
Working with Virtual Copies
This section describes the command usage and parameters for working with Virtual Copies.
Working with Virtual Copies 49