HP 3PAR Recovery Manager 1.1.0 Software for Microsoft Hyper-V User Guide (QL226-96343, June 2013)

Table 30 Mount-vCopy parameters (continued)

DescriptionOptional/RequiredParameter

Hyper-V user name. If not specified,

HypervUsername is used from

Optional-HypervPassword

Displays progress messages.Optional-Verbose

The command returns RmhMountVirtualCopySetResult objects and contains:

• RmhMountVirtualCopySet with current state updated

• Information on name, WWN, partition, volume guid path, and mount point of each Virtual

Volume mounted

Restore-vCopyVm

The restore-vCopyVm initiates a full restore or recovery of Virtual Machines.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Restore-vCopyVm -RmhServerName <RmhServerName> [-HypervName] -VcNameUuid

<VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-Force] [-RestartVm]

[-Verbose]

Table 31 Restore-vCopyVm parameters

DescriptionOptional/RequiredParameter

Host name of the RMH Server. This is

FQDN or IP address.

Required-RmhServerName

Optionally select Hyper-V host/cluster

to use. If not specified, Hyper-V

Optional-HypervName

host/cluster must be selected using

Select-Hyperv. This is FQDN or IP

address. Synonyms for Hyper-V are

supported. The localhost is not

supported.

Select VC by name/uuid.Required-VcNameUuid

Select name/uuid to filter VC selection

by VM.

Required-VmNameUuid

Specify timestamp of VC to locate in

the format mmddyyhhmmss.

Optional-Timestamp

Bypass confirmation prompt.Optional-Force

If specified, VM will be restarted.Optional-RestartVm

Displays progress messages.Optional-Verbose

This command returns the location of restored Virtual Machine and host name.

Working with Virtual Copies 53