HP 3PAR Recovery Manager 1.1.0 Software for Microsoft Hyper-V User Guide (QL226-96343, June 2013)
Result with Description
• List of node names.
List of Hyper-V node names for cluster. Empty list if Hyper-V specified is not a cluster.
Success Paths
• Scenario 1: Hyper-V cluster node names are fetched.
At least one Hyper-V cluster node name is returned.
• Scenario 2: Hyper-V specified is not a cluster.
Successful without Hyper-V cluster node names returned.
Failure Paths
• Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
• Scenario 2: Unable to fetch Hyper-V.
A Hyper-V is required to fetch cluster node names.
Get-EncryptedLoginPassword
Get-EncryptedLoginPassword retrieves a login password that may be use scripting.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-EncryptedLoginCredentials -RmhServerName <RmhServerName> [-Verbose]
Table 40 Get-EncryptedLoginPassword parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Displays progress messages.Optional-Verbose
Success Paths
• Scenario 1: Get is successful.
Get is successful.
Failure Paths
• Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
• Scenario 2: Failure to encrypt login password.
RMH Server cannot encrypt login password.
68 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands