HP 3PAR VSS Provider 2.2.2 for Microsoft Windows User Guide (QL226-97305, December 2013)
Table Of Contents
- HP 3PAR VSS Provider 2.2.2 Software for Microsoft Windows
- Contents
- 1 Introduction
- 2 Overview
- 3 Installation, Upgrade, and uninstallation
- System Setup
- Installing HP 3PAR VSS Provider for Microsoft Windows
- Verifying the Installation
- Repairing HP 3PAR VSS Provider Installation
- System Registry Values
- Upgrading from a Previous Version
- Verifying the Upgrade
- Removing HP 3PAR VSS Provider for Microsoft Windows
- Using the ProvCfg Command to Set Up or Modify a System Connection
- 4 HP 3PAR Remote Copy Software and HP 3PAR VSS Provider
- 5 Diagnostics
- 6 Support and Other Resources
- 7 Documentation feedback
3. Insert the HP 3PAR VSS Provider for Microsoft Windows CD into the CD-ROM drive.
4. Click Start→My Computer to expand the CD-ROM drive directory.
5. Click the appropriate setup.exe depending on the platform.
6. Follow the instructions in the HP 3PAR VSS Provider for Microsoft Windows installer window.
NOTE: The Disk Cost button analyzes the amount of available storage space and compares
it to the amount required for the HP 3PAR VSS Provider for Microsoft Windows installation.
The HP 3PAR StoreServ Storage System Connection Configuration window appears. Enter the
HP 3PAR StoreServ Storage System name and the HP 3PAR user information and password.
This information is required when connecting to the system using the HP 3PAR Command Line.
7. Click Next.
The HP 3PAR Storage System connection from the StoreServ Storage System Connection
Configuration window appears.
Installing HP 3PAR VSS Provider for Microsoft Windows 11