HP 3PAR VSS Provider 2.2.2 for Microsoft Windows User Guide (QL226-97305, December 2013)

Table 3 Application Events (continued)
ActionDescriptionEvent
ID
Check the LUN Configuration using HP
3PAR Management Console (IMC).
Could not create snapshot of a set containing VVs from disparate
HP 3PAR StoreServ Storages.
5075
Contact your local service provider.3PAR Virtual Copy License is expired.5076
Contact your local service provider.3PAR Virtual Copy License is missing.5077
Verify that the StoreServ exists using
ProvCfg utility. If StoreServ does not
Cannot find HP 3PAR StoreServ Storage Configuration for Server
ID < StoreServ ID>.
5078
exist, then register the StoreServ and try
the operation again.
Check the FC and iSCSI adaptor
connections.
Cannot find the HP 3PAR StoreServ Storage host name through FC
or iSCSI Adapter.
5079
Remove the LUN from HP 3PAR OS
Console.
EAIPC failure in HP 3PAR StoreServ Storage. Manual operation is
required to remove LUN exposure of <VVName>.
5080
Perform the operation again after some
time.
SnapshotSet <Snapshot Set ID> creation fails due to Virtual Copy
creation failure.
5081
Perform the operation again after some
time.
Fail to identify read-only snapshots, operation timed out.5082
Perform the operation again after some
time.
Fail to identify read-only snapshots.5083
Perform the operation during off peak
time.
Snapshot is not created within the VSS I/O freeze time.5084
Check the connection to the StoreServ
and remove the <Virtual Volume Name>
Failed to establish connection to HP 3PAR StoreServ Storage.
Manual operation is required to remove <Virtual Volume Name>.
5085
manually using HP 3PAR Management
Console (IMC).
Check if the HP 3PAR OS version is
supported with this version of HP 3PAR
VSS Provider.
Invalid TPD release targeted.5086
Set the LogLevel to ‘4’ and recreate the
issue. Provide the 3parprov.log file
to your local service provider.
Snapshot set is different than the previous one. Aborting prepare
snapshot.
5087
Verify that the StoreServ exists using
ProvCfg utility. If StoreServ does not
HP 3PAR StoreServ Storage <StoreServ Name> cannot be found
in registry or environment variable TPDSYSNAME.
5088
exist, then register the StoreServ and try
the operation again.
Check VSS registered user privileges
from HP 3PAR OS.
Insufficient privilege for the user in HP 3PAR StoreServ Storage
<Store Serv Name>.
5089
The maximum number of LUNs that can
be presented to a host is 255. Remove
unwanted LUNs and retry the operation.
Maximum of 255 LUN number is reached.5090
Check connectivity to StoreServ and retry
the operation.
HP 3PAR CLI connection error.5091
30 Diagnostics