HP 3PAR Recovery Manager Diagnostics Tool for Exchange User Guide (QL226-97049, February 2014)

Table 1 Diagnostic checks for RME (continued)
ParametersDiagnostic checks
Node WWN
•
• Number of ports
• Driver version
• Firmware version
• Model and manufacturer details along with port WWN, type, and state
NOTE: The RMD tool also discovers the following details:
• Virtual HBAs in a Windows Hyper-V virtual machine
• VFC adapter details, if VFC is configured on a Hyper-V environment
Checks for the following third party backup tool details:Third Party Backup Tool
• Software name
• Software version
• Software components installed
Software Settings
• Inform CLI version
• VSS provider version
• RME version
System Settings
• System name
• Windows version
• Processor
• Processor type
Viewing diagnostic test status
The RMD tool displays the following details during diagnosis:
• Target Application
• Executed\Total Number of Servers
• Target Server
• Tests Executed
• Total Number of Tests to be Executed in this Server
The RMD tool displays details of the checks executed on selected servers. A green check mark
against a test indicates that the test execution is complete. A red cross indicates that the test
execution is not complete.
NOTE: The green check mark against each test indicates that the test execution is complete.
However, this does not imply that the test result is always successful.
Viewing diagnostic test status 11