HP 3PAR Recovery Manager 4.4.2 for Microsoft Exchange 2007, 2010, and 2013 User Guide

HpRmCli Exch peer (For Exchange 2007)

SYNTAX

HpRmCli Exch peer -bs <peer_server>

Hprmcli Exch peer display

Hprmcli Exch peer clear

DESCRIPTION

The HpRmCli Exch peer command configures the peer backup servers for two HP 3PAR

StoreServ Storage System CCR configurations. The backup server executes all commands and

sends certain commands to the peer backup server to run (such as create and backup) for the

passive node option. Once the configuration is set, you need not run this command again unless

you want to change the peer relationship between the backup servers.

PARAMETERS

The following options are supported:

• -bs <peer_server> - The server's name you would like to designate as your peer backup

server.

• -display - Used if the -bs parameter is not used. Displays the current configuration of your

peer backup servers.

• -clear - To remove the peer relationship between backup servers. Once the peer relationship

is removed, both backup servers are no long able to manage CCR nodes.

NOTE: The HpRmCli Exch peer command is intended only for CCR configuration. The -bs

option only needs to be run once to set up the peer relationship and to manage the CCR

configuration.

Examples

The following command will configure the peer backup server.

HpRmCli Exch peer -bs server1

HpRmCli Exch peer (For Exchange 2007) 79