HP 3PAR OS 3.1.2 MU5 Upgrade Instructions

Table 3 Storage Replication Adapter for VMware Support Matrix
HP 3PAR
Operating
HP 3PAR Array Models
Connectivity
Protocols
Hypervisor
Versions
Site Replication
Manager Version
SRA
Version
System
Versions
2.3.1 MU2Fibre Channel4.1.0
••• HP 3PAR F-Class StorageESX / ESXi
4.0
4
• •4.1 HP 3PAR T-Class Storage
• ESX / ESXi
4.1
• 3PAR S400,S800, E200
3.1.1
• HP 3PAR F-Class Storage
• HP 3PAR T-Class Storage
• HP 3PAR StoreServ 10000
Storage
2.3.1 MU25.1.1
•••• HP 3PAR F-Class StorageFibre
Channel
ESX / ESXi
4.0
5
• •5.1 HP 3PAR T-Class Storage
•• iSCSIESX / ESXi
4.1
• 3PAR S400,S800, E200
• ESXi 5.0
• 3.1.1• HP 3PAR F-Class Storage
• ESXi 5.1
•• 3.1.2HP 3PAR T-Class Storage
• HP 3PAR StoreServ 10000
Storage
• HP 3PAR StoreServ 7000
Storage
2.3.1 MU25.5
•••• HP 3PAR F-Class StorageFibre
Channel
ESX / ESXi
4.0
5
• •5.1 HP 3PAR T-Class Storage
•• iSCSIESX / ESXi
4.1
• •5.5 3PAR S400,S800, E200
• ESXi 5.0
• 3.1.1• HP 3PAR F-Class Storage
• ESXi 5.1
•• 3.1.2HP 3PAR T-Class Storage
• ESXi 5.5
• HP 3PAR StoreServ 10000
Storage
• HP 3PAR StoreServ 7000
Storage
Verifying the Service Processor Software Level
The Service Processor (SP) must be updated to the required SP software. To verify the level of SP
software running on the SP for the system you are updating, log on to the SPMAINT utility to display
the SP level.
WARNING! The SP level must be at SP 4.1.0.GA-97 to continue with this HP 3PAR OS update.
NOTE: HP recommends to update SP 4.1.0.GA-97 with the latest available SP patch.
Check the SP Release Level
1. Connect to the SP.
2. From the SPMAINT main menu, enter: =1.1 (Display SP Version).
10 Pre-Installation Requirements