HP 3PAR OS 3.1.2 MU5 Release Notes

DescriptionItemIssue ID
HP 3PAR 7200 storage system or HP 3PAR 7400
storage system Node Cage Battery alerts will not
HP 3PAR 7200 storage system or HP 3PAR 7400
storage system Node Cage Battery alerts will not
display null as the failure state.
78834
display null as the failure state. It will display the
associated failure state such as not present, end of
life, or not available.
This is resolved. It allows pre-provision of storage
and attaching a host later to the SAN.
Cannot create VLUN on free port 1:2:1 in
vlun_rand_create test.
79555
An incoming NOP-Out PDU with data payload
greater than 8K might cause memory corruption
leading to an unresponsive node. This is resolved.
An oversized NOP-Out PDU might cause a node
to become unresponsive.
82576
When the array is attempting to invalidate a token
but does not have the resources to do it, assertion
The issue is :
Fix Assertion failed: sc->sc_vlun_stats_act == 0
83204
fails with a message "Assertion failed:
sc->sc_vlun_stats_act == 0". When sending a busy
status to the host, the sc_vlun_stat_act flag is not
cleared. This results in the assertion failure when
freeing the SC structure. This is resolved and it clears
the flag prior to returning busy status.
The data ports for DC1, DCS2, and DCN1 cages
are now reported for the physical locations
EBOD and EOS cages report data ports
corresponding to the documentation.
86369
corresponding to the documentation. This corrects
command output such as showcage -d and
showalert.loca.
Viper-C 3P03/VCX3 firmware is checked in HP 3PAR
OS 3.1.2.MU3 and HP 3PAR OS 3.1.3. An
3P03 Viper-C drive FW86448
upgradepd to the Viper-C drives upgrades the
Viper-C drive firmware. Viper-C drives are the drives
with model string: HVIPC0600GBFC15K or
HVIPC0300GBFC15K.
Removed misleading "Success" string from
SCCMD_DOCDB error messages.
Removed misleading "Success" string from
SCCMD_DOCDB error messages.
86658
Earlier, it was possible to install license keys
truncated at certain points resulting in an unusable
Prevented installing truncated license keys.86779
key being installed. The setlicense command
now properly handles these cases.
The checkupgrade script is updated to prevent this
error:
can't read
"connections(123456789ABCDEF1)": no
such element in array.
Resolved the issue that checkupgrade cannot read
"connections(123456789ABCDEF1)"
87160
When HP-UX or AIX host ports lose the connectivity
to the fabric momentarily and their N-port IDs do not
HP-UX/AIX host ports stalling on I/O.87497
change, they assume that their sessions with target
ports are intact. The host ports do not login again to
the target ports. HP 3PAR target ports require that
the host port will login again regardless of the
duration of the loss of connectivity. This leads to the
host ports stalling on I/O. This is resolved by forcing
the host ports to login again by sending a LOGO to
them when they reappear in the fabric. This is
available in HP 3PAR OS 3.1.1 MU4, HP 3PAR OS
3.1.2 MU3, and HP 3PAR OS 3.1.3 GA.
Added support for SCSI Block Device Characteristics
(page code B1h) for host OS requirements.
Added support for SCSI VPD Page B1h.88374
52 HP 3PAR OS 3.1.2 MU3 Release Notes