AB378A Fibre Channel Mass Storage Adapter Installation Guide, December 2005

Fibre Channel Adapter Installation

Obtaining Card Information after Installation

Chapter 1

N_Port Node World Wide Name = 0x50060b00002ae88b

N_Port Port World Wide Name = 0x50060b00002ae88a

Switch Port World Wide Name = 0x200a0060691026e2

Switch Node World Wide Name = 0x10000060691026e2

Driver state = ONLINE

Hardware Path is = 0/0/10/1/0

Maximum Frame Size = 2048

Driver-Firmware Dump Available = NO

Driver-Firmware Dump Timestamp = N/A

Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx &

24xx Driver B.11.23.04 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Oct 20

2005,11:15:37

This card is capable of running at higher bus speeds, up to 266Mhz. The speed of the server slot determines

the maximum speed. The actual speed is displayed as the PCI Mode.

Example of Vital Product Data (VPD) after installation

# fcmsutil /dev/fcd4 vpd

V I T A L P R O D U C T D A T A

--------- ------------- -------

Product Description : HP PCI-X 2.0 4Gb Fibre Channel HBA

Part number : AB378-60001

Engineering Date Code : A-4543

Part Serial number : JP45460121

Misc. Information : PW=7.5W;PCI=66MHZ;PCI-X=266MHZ

Mfd. Date : 4546

Mfd. ID : AB378-60001

Check Sum : 0x3f

EFI version : 01.01

ROM Firmware version : 04.00.70

BIOS version : 01.06

FCODE version : 01.12

Asset Tag : NA

Example of ioscan entry after installation

fc 4 0/0/10/1/0 fcd CLAIMED INTERFACE HP AB378-60001 4Gb Single

Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)

/dev/fcd4