AB378A Fibre Channel Mass Storage Adapter Installation Guide, December 2005

Fibre Channel Adapter Installation
Attach to Fibre Channel Devices
Chapter 1
9
Figure 1-1 AB378A Single Port Fibre Channel Adapter and Port WWN
The N_Port Port World Wide Name (WWN) is printed on the bulkhead.
Attach to Fibre Channel Devices
1. Be sure you have removed the Fibre Channel host bus adapter’s optical port protector (if included).
2. Be sure you have attached a connector cable to the Fibre Channel host bus adapter. Align the slotted plug
with the keyed connector. Push the connector in until you hear it click.
3. Attach the free end of the cable to a compatible Fibre Channel device.
4. Power up the system.