Mediainit Generic Problem Workaround document

Workaround:
Method I: Format using diagnostic format utility instead of mediainit(1)
You can format using the diagnostic format utility instead of mediainit(1) by running the
following commands:
# /usr/sbin/cstm
cstm>select path 0/2/1/1.2.0
cstm>hlic
-- Install HP-Only License --
This license is intended for trained HP support personnel only.
Enter HP-Only License Password: []
-- Information --
The HP-Only license was successfully installed for this session.
You have access to all licensed and HP-Only tools on all systems.
cstm>xt
-- Expert Tool for device SCSI Disk on path 0/2/1/1.2.0. --
Expert Tool version A.01.03
Use Help to get more information.
Disk Expert>fu
-- CAUTION --
The Format Unit command will destroy all user data on the disk
drive.
The command can also take a long time to execute.
Enter Cancel, Help, or OK: [Cancel] OK
-- Expert tool: Format Unit for device SCSI Disk on path
0/2/1/1.2.0. --
Format Options
* 1 Retain both Primary and Growing Defect List (p_g_list)
2 Retain only the Primary Defect List (p_only)
Enter selection: [p_g_list]
The format operation on SCSI Disk at path 0/2/1/1.2.0 has been
started.
Format command completed without errors.
Disk Expert>exit
-- Expert Tool for device SCSI Disk on path
4/0/14/1/0/4/0.8.0.255.0.0.0. -- Do you really want to exit?
Enter Cancel, Help, or OK: [OK] ok
Expert tool exiting.
cstm>exit
-- Exit the Support Tool Manager --
Are you sure you want to exit the Support Tool Manager?
Enter Cancel, Help, or OK: [OK] ok