KB.15.15

Configures RADIUS accounting service type and how data will be sent to the RADIUS

server.

< exec | network | system | command >

Specifies an accounting service type to configure. See “Accounting service types”

(page 185).

start-stop

Applies to exec, network, and system accounting service types.

stop-only

Applies to all accounting service types.

radius

Uses RADIUS as the accounting period.

syslog

Uses syslog as the accounting protocol.

interim-update

Applies to the commands accounting service type.

Accounting service types to track

• Exec

Use exec if you want to collect accounting information on login sessions on the switch via

the console, Telnet, or SSH. See “Accounting services” (page 185)

• System

Use system if you want to collect accounting data when:

• A system boot or reload occurs

• System accounting is turned on or off

NOTE: There is no time span associated with using the system option. It simply causes the

switch to transmit whatever accounting data it currently has when one of the above events

occurs.

• Network

Usenetwork if you want to collect accounting information on 802.1X port-based-access to

the network by users connected to the physical ports on the switch. See “Accounting services”

(page 185).

• Commands: When commands accounting is enabled, an accounting notice record is sent

after the execution of each command.

160 RADIUS Authentication, Authorization, and Accounting