KB.15.15

Configures authorization for controlling access to CLI commands. When enabled,

the switch checks the list of commands supplied by the RADIUS server during user

authentication to determine if a command entered by the user can be executed.

Figure 125 Example of show authorization command

Viewing RADIUS Statistics

Syntax:

show radius [host< ip-addr>]

Shows general RADIUS configuration, including the server IP addresses. Optional

form shows data for a specific RADIUS host. To use show radius, the server's IP

address must be configured in the switch, which. requires prior use of the

radius-server host command. See (page 185) for more information.

For the 3800, 5400zl, and 8200zl switches, when the switch is in enhanced secure

mode, you are prompted about displaying sensitive information before the command

is executed. For more information, see “Secure Mode (3800, 5400zl, and 8200zl

Switches)” (page 498).

Figure 126 Example of general RADIUS information from show radius command

Figure 127 RADIUS server information from the show radius host command

170 RADIUS Authentication, Authorization, and Accounting