KB.15.15

switch suspends the timer and resets itself to send a message as soon as a new

"deny" match occurs.

• default

Sets the wait period timer to 300 seconds.

• <30-300>

Sets the wait period timer to the specified number of seconds.

Viewing

Viewing an ACL summary

This command lists the configured IPv4 and IPv6 ACLs, regardless of whether they are assigned

to any VLANs.

Syntax:

show access-list

List a summary table of the name, type, and application status of IPv4 and IPv6

ACLs configured on the switch.

Figure 186 Summary table of access lists

MeaningTerm

Shows whether the listed ACL is an IPv4 std ACL, an IPv4 extACL, or an IPv6 ACL.Type

Shows whether the listed ACL has been applied to an interface (yes/no).Appl

Shows the identifier (name or number) assigned to each ACL configured in the switch.Name

Viewing the content of all ACLs on the switch

This command lists the configuration details for the IPv4 and IPv6 ACLs in the running-config file,

regardless of whether any are actually assigned to filter IPv4 traffic on specific VLANs.

Syntax:

show access-list config

List the configured syntax for all IPv4 and IPv6 ACLs currently configured on the

switch.

276 IPv4 Access Control Lists (ACLs)